The type of membrane used in the Sparkle Spot-Free Rinse Reverse Osmosis System is a thin film Composite polyamide. At optimum operating conditions, this membrane removes over 98% of the dissolved solids in the water and nearly 100% of suspended particles, which includes heavy weight metals and organic molecules (see list). A programmable controller on-board the unit monitors spot-free production and automatically cleans the membrane with a flush cycle at the correct tome. This allows the Jim Coleman Company to give a three year warranty on the life of the membrane. Flow meters on the unit allow proper monitoring of the RO production and reject.

Stainless Steel Frame with Leveling Legs

R.O. Production and Delivery System

Thin Film Composite Membrane

Stainless Steel Control Panel

Computer controlled

Flow meters

Solenoid Valves

Automatic Membrane Flush

Low Pressure Cut-off

Low Water Level Cut-off

1/2 HP –220 volt 1 PH
Production Pump and Motor

1 HP – 220 volt 1 PH Delivery
Pump and Motor

ProCon Vane Pump

5 Micro Pre-filter

1 Cubic Foot Charcoal Filter

175 gallon Polyethylene
Storage Tank (31”D x 57”H)

Spot-Free Rinse Sign

3’ x 6’ Spot-Free Rinse Banner

E.T.L. Approved

Optional Features

High Pressure Delivery

Automatic Bay Delivery System

Stainless Steel Arches

Extra or Larger Tanks

1600, 3200 and 4800 gpd Systems Available

Solute Per Cent Rejection

Sodium Fluoride NaF 98

Sodium Cyanide NaCN (pH 11) 97

Sodium Chloride NaCI 98

Silica SiO2 (50 ppm) 98

Sodium Bicarbonate NaHCO3 98

Sodium Nitrate NaNO3 93

Magnesium Chloride MgCI2 98

Calcium Chloride CaCI2 99

Magnesium Sulfate MgSO4 99

Nickel Sulfate NiSO4 99

Copper Sulfate CuSO4 99

Formaldehyde 35

Methanol 24

Ethanol 70

Isopropanol 90

Urea 70

Lactic Acid (pH 2) 94

Lactic Acid (pH 5) 99

Glucose 98

Sucrose 98

Chlorinated Pesticides 99